TM9100 Series P25 Mobiles

  1. The TM9100 series (TM9155 and TM9135) offer industry-leading digital audio clarity, superb usability and are tested in a P25 Compliance Assessment Program (P25 CAP) recognized laboratory for P25 interoperability you can depend on. The TM9100 series are designed for ultimate flexibility – ready to change with you as your needs change. The TM9100s give you the flexibility of working in digital, analog and auto-sensing dual mode and can be used on analog, P25 conventional, trunked and simulcast networks.

    • The TM9155 mobile is specifically designed for the needs of first responders, ensuring communications are secure and configurable
    • The TM9135* mobile also provides reliable digital communications for Public Safety users who require high audio clarity, but without all the possible features and configurations of the TM9155

     

    Tait P25 TM9100 Phase 1 (FDMA) Mobiles

    The TM9155 - interoperable, flexible, configurable

    Key Features:

    • FIPS 140-2 certified encryption for secure communications
    • A range of analog signaling features - MDC1200 encode/decode* and Two Tone decode with the purchase of software licenses**
    • Tested beyond MIL-STD-810C, D, E and F
    • Comprehensive scanning features including P25 talk group, priority, dual priority and editable scanning
    • High temperature display option optimizes screen visibility in hot environments.

     

    The TM9135 – tough, reliable and interoperable

    Key Features:

    • Ease of operation: the user interface is identical across all the Tait P25 portables, mobiles and hand-held control heads
    • Tested beyond MIL-STD-810C, D, E and F
    • Supports individual, group, broadcast and emergency calls
    • Advanced voting optimizes channel reception
    • Comprehensive scanning features including P25 talk group, priority, dual priority and editable scanning

    Download the TM9155 (566KB) and TM9135 (524KB) specifications sheets for more detailed information

    *Not all software licenses are available for the TM9135 mobile
    **MDC1200 decode includes calling identity display and inhibit/uninhibit functionality.
    ***Software license option(s) available separately

  2. TM9155 Specifications Table

     

    General Performance

     

    Frequency ranges Frequency
    band+
    Transmit
    power
    Transmit
    current

    (typical)
    VHF 136-174MHz
    25W <5.5A

    136-174MHz*
    50W <10.5A

    136-174MHz
    110W <30A
    UHF 350-400MHz*
    40W <8.5A

    380-420MHz*
    40W <8.5A

    400-470MHz
    25W <6.5A

    400-470MHz
    40W <8.5A

    450-530MHz
    25W <6.5A

    450-520MHz
    40W <8.5A

    Transmit Receive


    700/800MHz 762-776MHz 762-776MHz



    792-825MHz
    30W (<806MHz) <10A

    850-870MHz 850-870MHz 35W (>806MHz) <10A
    Frequency stability ±1.5ppm (-22ºF to +140ºF/-30ºC to +60ºC)
    Channels/zones 1,000 channels/30 zones
    Talk groups 26 talk group lists comprised of up to 50 members each
    Scan groups 300 with up to 50 members each, max. of 2,000 members total
    Power supply 10.8-16VDC
    Channel spacing 12.5/15/20/25/30kHz
    Frequency increment/channel steps 2.5/5/6.25
    Dimensions (DxWxH) standard control head 1.38 x 7.24 x 2.8in (35 x 184 x 71mm)
    Dimensions (DxWxH) radio body
    25W 6.9 x 6.3 x 2.1in (175 x 160 x 52mm)
    30/35/40/50W 7.7 x 6.3 x 2.1in (195 x 160 x 52mm)
    110W 14.6 x 9.8 x 5in (370 x 250 x 121mm)
    Weight standard control head 11.6oz (330g)
    Weight radio body




    25W 42.3oz (1,200g)
    30/35/40/50W 49.4oz (1,400g)
    110W 296oz (8,400g)
    Operational temperature -22ºF to +140ºF (-30ºC to +60ºC)
    Sealing IP54 dust and rain
    RF connector 50 ohm BNC or Mini UHF
    Interface connectors 3 Interface Connectors with Serial Ports
    Analog signaling options MDC1200 encode/decode, Two Tone decode, PL (CTCSS), DPL (DCS)


    Environmental Standards

     

    Applicable MIL-STD-810C, D, E & F Method  Procedure Procedure

    25/30/35/50/110W 25/30/35/50W 110W
    Low pressure 500.4  2 2
    High temperature 501.4  1, 2 2
    Low temperature 502.4  1, 2 2
    Temperature shock 503.4  1 1
    Solar radiation 505.4  1 -
    Rain 506.4  1, 3 3
    Humidity 507.4  1 -
    Salt fog 509.4  1 1
    Dust 510.4  1 1
    Vibration 514.5  1 1
    Shock 516.5  1, 6 6





    Transmitter

     

    Output power VHF/UHF  700/800MHz 



    (TIA/EIA 102 and 603a) (TIA/EIA 102 and 603a)


    25W 25W, 12W, 5W, 1W



    30W
    30W, 15W, 5W, 2W


    35W
    35W, 15W, 5W, 2W


    40W 40W, 20W, 15W, 10W



    50W 50W, 25W, 15W, 10W



    110W 110W



    Modulation limiting




    25/30kHz channel ±5kHz ±5kHz


    12.5kHz channel ±2.5kHz ±2.5kHz


    FM hum and noise (typical)




    25/30kHz channel -43dB -40dB


    12.5kHz channel -38dB -33dB


    Conducted emissions (typical) -85dBc -75dBc


    Audio response (analog) 300-3,000Hz +1/-3dB
    Audio distortion < 3% at 1kHz 60% deviation
    Transmit attack time (TIA/EIA 102) 50mS


    Receiver (typical figures shown)

     


    VHF/UHF VHF 50W VHF 110W 700/800MHz
    Analog sensitivity




      12dB SINAD 0.28μV 0.315μV 0.25μV 0.28μV

    (-118dBm) (-117dBm) (-119dBm) (-118dBm)
    Digital sensitivity (TIA/EIA-102)




    5%BER 0.22μV 0.233μV 0.18μV** 0.18μV

    (-120dBm) (-120dBm) (-122dBm) (-122dBm)
    Intermodulation rejection
    (TIA/EIA 102)
    -75dB -75dB -70dB -75dB
    Adjacent channel selectivity




    25/30kHz channel (TIA/EIA 603a) -75dB -80dB -75dB -75dB
    12.5kHz channel (TIA/EIA 102) -65dB -70dB -65dB -65dB
    Spurious response rejection -75dB -90dB -70dB -75dB

    FM hum and noise





    25/30kHz channel -43dB -43dB -43dB -43dB
    12.5kHz channel -40dB -40dB -40dB -40dB
    Residual audio noise ratio 45dB 45dB 45dB 45dB
    Audio distortion @ rated audio (3W) 3% @ 1kHz 60% modulation
    Optional external speaker output 10W (into 4 ohms)









    Regulatory Data

     


    USA VHF CFR 47 Parts 22, 74, 90, 95J, 90.210

    UHF CFR 47 Parts 22, 74, 90, 95A, 90.210

    800MHz CFR47 Parts 22, 90
    Canada
    RSS-119
    Europe
    EN300 086, EN300 113


    EN301 489


    EN60950
    Australia/New Zealand
    AS/NZ54295
    Type approval
    FCC Industrie Canada NTIA
    25W VHF CASTMAB1E 737A-TMAB1E


    UHF CASTMAH5E 737A-TMAH5E



    CASTMAH6E 737A-TMAH6E

    30/35W UHF CASTMAK5F 737A-TMAK5F

    40W UHF
    n/a 350-400MHz*



    n/a 380-420MHz*
    40W UHF CASTMAH5F n/a



    CASTMAH7F n/a

    50W VHF CASTMAB1F n/a 136-174MHz*
    110W (ERFPA) VHF CASTMAB1Z n/a

    Emission designators 10K0F1D, 10K0F1E, 10K0F7D, 10K0F7E, 11K0F3E, 12K7F1D 16K0F3E, 6K60F2D, 7K70F1D 8K10F1D, 8K10F1E, 8K10F7D 8K10F7E, 9K60F2D





    Specifications are subject to change without notice and shall not form part of any contract. They are issued for guidance purposes only.

    +Please note that not all frequency bands and power outputs are available in all markets. For further information please check with your nearest Tait office or authorised dealer.

    * Tait confirms that this product models conforms with NTIA requirements.
    ** Receiver preamplifier installed.

    The word Tait and the Tait logo are trademarks of Tait Ltd. Tait is an ISO 9001:2008 and ISO 14001:2004 certified supplier.