TM9400 P25 Mobile Radios

  1. The Tait TM9400 is a high-performing, flexible and robust mobile, designed for use in challenging environments while delivering high quality audio and intuitive operation to first responders around the world.  

    Tait P25 TM9400 Phase 2 (TDMA) Upgradable Mobile

    More efficient networks. More possibilities.

    Each TM9400 features multiple modes of operation, including analog, 12.5kHz P25 Phase 1 FDMA conventional/trunked, upgradable to 6.25kHz (equivalent) P25 Phase 2 TDMA trunked and LSM (CQPSK) decode capability, for ease of migration to a more spectrally efficient solution when required.

    For safe, secure and effective communications on the move, the TM9400 features Lone Worker, a covert microphone and stealth emergency modes as standard. For additional operational security, the TM9400 supports end-to-end encryption (including AES), the Tait Key Fill Device (KFD) and Over-the-air Rekeying (OTAR).

    The TM9400 allows you to work the way that suits you best. With multiple configuration options, software licenses for additional features, and programmable function keys, the TM9400 is an efficient addition to any organization.

    The TM9400 provides:

    • Operation in VHF and 700/800MHz frequency bands
    • Reduced migration risk with the multiple modes of operation
    • Greater vendor choice, increased competition and interoperability with adherence to the P25 standards and software-upgradability to P25 Phase 2
    • Efficient operations with encryption, voice and data, simulcast support and pre-set status messages
    • Flexible expansion via an options slot for additional capabilities
    • Rugged build with an IP54 rating, water-resistant control head, and exceeding relevant MIL-STD-810G

    Product Models

    • TM9435 - restricted functionality, P25 Phase 2 upgradable mobile, single head, single body
    • TM9455 - full functionality, P25 Phase 2 upgradable mobile, single head, single body
    • TM9457 - full functionality, P25 Phase 2 upgradable mobile, dual head, single body

    Download the TM9400 specifications sheet (418KB) for more detailed information

  1. TM9400 Specifications Table

     

    General Performance

     

    Frequency stability ±0.5 ppm (-22ºF to +140ºF/-30ºC to +60ºC)
    Channels/zones 1,000 channels/50 zones
    (2,000 channels/100 zones optional enhancement with software license)
    Talk groups 50 talk groups, up to 1,000 members total
    (2,000 members optional enhancement with software license) 
    Scan groups 300 with up to 50 members each, max. of 2,000 members total
    Power supply 10.8-16VDC
    Active standby current 0.15A
    Channel spacing 12.5/15/20/25/30kHz
    Frequency increment 2.5/5/6.25
    Dimensions (DxWxH)
    Control head 1.38 x 7.24 x 2.8in (35 x 184 x 71mm)
    Radio body - 25W 6.9 x 6.3 x 2.1in (175 x 160 x 52mm)
    Radio body - 30/35/50W 7.7 x 6.3 x 2.1in (195 x 160 x 52mm)
    Weight
    Control head 0.73lb (0.33kg)
    Radio body - 25W 2.6lb (1.2kg)
    Radio body - 30/35/50W 3.1lb (1.4kg)
    Operating temperature -22ºF to +140ºF (-30ºC to +60ºC)
    Water and dust protection IP54
    RF connector 50 ohm BNC or Mini UHF
    Interface connectors 3 Interface Connectors with Serial Ports
    Signaling options (analog) MDC1200 encode/decode, Two Tone decode, PL (CTCSS), DPL (DCS)


    Environmental Standards

     

    Applicable Method Procedure
    MIL-STD-810C, D, E, F & G

    Low pressure 500.5 2
    High temperature 501.5 1, 2
    Low temperature 502.5 1, 2
    Temperature shock 503.5 1
    Solar radiation 505.5 1
    Rain 506.5 1, 3
    Humidity 507.5 2
    Salt fog 509.5 1
    Dust 510.5 1
    Vibration 514.6 1
    Shock 516.6 1, 5, 6



    Transmitter

     

    Frequency band VHF VHF UHF 700/800MHz
    Transmit power 25/12/5/1W 50/25/15/10W 25/12/5/1W
    40/25/15/10W
    <806MHz: 30/15/5/2W
    >806MHz: 35/15/5/2W
    Transmit frequency ranges 136-174MHz 136-174MHz 400-470MHz
    450-520MHz
    762-870MHz
    Transmit current <5.5A <10.5A (25/12/5/1W) <6A
    (40/25/15/10W) <10.5A
    <10A
    Modulation limiting



    12.5/15kHz channel ±2.5kHz ±2.5kHz ±2.5kHz ±2.5kHz
    25/30kHz channel ±5kHz ±5kHz ±5kHz ±5kHz
    FM hum and noise



    12.5kHz channel -45dB -45dB -40dB -40dB
    25kHz channel -48dB -48dB -45dB -45dB
    Radiated and conducted emissions -85dBc -80dBc -80dBc -80dBc
    Audio response (analog) +1/-3dB +1/-3dB +1/-3dB +1/-3dB
    Audio distortion (analog) 1.5% at 1kHz, 60% deviation
    Duty cycle 5W: continuous @ +104°F (+40°C)

    25W: 2min Tx, 4min Rx for 8 hrs @ +140°F (+60°C)

    35/50W: 1min Tx, 4min Rx for 8 hrs @ +140°F (+60°C)


    Receiver

     

    Frequency band VHF UHF 700/800MHz
    Receive frequency ranges 136-174MHz 400-470MHz
    450-520MHz
    762-776MHz
    850-870MHz
    Sensitivity (analog)


    12dB SINAD 0.22μV (-120 dBm) 0.22μV (-120 dBm) 0.28μV (-118 dBm)
    Sensitivity (P25)


    5% BER 0.22μV (-120dBm) 0.22μV(-120 dBm) 0.22μV (-120dBm)
    Intermodulation rejection (P25) TIA-102 76dB 75dB 75dB
    Adjacent channel rejection


    12.5kHz (P25) TIA-102 60dB 60dB 60dB
    25kHz TIA-603 (2-tone) 73dB 70dB 70dB
    Spurious response rejection (P25) TIA-102 80dB 80dB 80dB
    Residual audio noise ratio (P25) TIA-102 45dB 45dB 45dB
    FM hum and noise


    12.5kHz channel -45dB -40dB -40dB
    25kHz channel -48dB -45dB -45dB
    Audio distortion
    (3W rated audio)
    1.5% @ 1kHz 60% modulation
    Optional external speaker output 10W (into 4 ohm)




    Specifications are subject to change without notice and shall not form part of any contract. They are issued for guidance purposes only. All specifications shown are typical.

    All frequency bands and channel spacings may not be available in all markets. For further information please check with your nearest Tait office or authorized dealer.